Important notice to our customers; We will be closing for our Christmas/New Year break from 21/12/2024 and reopening on 22/01/2025. Therefore any orders placed during this time will not be processed until our return. We would like to thank you all for your support over the last 12 months and wish you all a very Merry Christmas and a Safe New Year

Scorpion HK-4035 Shaft Kit (5mm 30mm)

Scorpion HK-4035 Shaft Kit (5mm 30mm)

MASHK4035Shaft
$39.00
$39.00
Arriving Soon
Shipping calculated at checkout.

HK-4035 Shaft Kit (5mm 30mm)

Product Description

The Scorpion HK-4035 motors are built with 8mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-4035 series Scorpion Helicopter Motors.

The shaft for the HK-4035 series motors measures 8mm in diameter, and is 94.7mm in long. The pinion end of this shaft is ground down to 5mm to allow the user to install 5mm pinion gears. The shaft kit will also fit other brushless motors that require a 5mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.

Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing.