All the features which are usually the preserve of the larger power supply units are present in the compact PowerBox Mercury SR2: iGyro, servo matching, unrestricted channel assignment and even a door sequencer: it really is a complete system!+
Features
- 16 outputs
- High-performance battery backer with high continuous load capacity
- OLED screen, legible in sunlight
- Bi-lingual menu system
- Consistent duplication of all power electronics
- Redundant electronic switch
- Servo matching for all 16 outputs
- Auto matching function
- Door sequencer with Setup Assistant
- The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
- 9 independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder
- Two selectable output voltages: 6.0 V or 7.8 V
- Optional GPS III for speed-dependent gyro compensation
- Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link, JR X-BUS and Graupner HoTT
- Transmission of battery, receiver and GPS* data
- Virtually all features can be controlled from PowerBox and Jeti transmitters
- Selectable servo frame rate: 12ms, 14ms, 16ms, 18ms
- Servo feedback current suppression
Set contents
- PowerBox Mercury SR2
- OLED Display
- SensorSwitch
- 2 patch-leads
- 4 rubber grommets and brass spacer sleeves
- 8 retaining screws
- Operating instructions in German and English
|
|
Technical Data
| Operating voltage | 4.0V - 9.0V |
| Power supply | 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH |
| Current drain Power-on state | 100mA |
| Current drain Standby | 30µA |
| Maximum load current | 2 x 20A (<30s) |
| Drop-out voltage | 0.3V |
| Output voltage | 6.0V, 7.8V |
| Signal input | serial |
| Supported RC systems | PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott |
| Receiver redundancy | SRS |
| Channels | 26 |
| Servo sockets | 16 |
| Programmable servo outputs | 16 |
| Servo signal resolution | 0,25µs |
| Signal frame rate | 12ms, 14ms, 16ms, 18ms |
| Gyro sensor type | external iGyro SAT |
| Number of sensor axes | 9 |
| Screen | OLED 128x64 pixels |
| Integral door sequencer | yes |
| Supported telemetry systems | P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott, X.BUS |
| Dimensions | 89 x 54 x 19 mm |
| Weight | 75g |
| Weight Sensor Switch | 15g |
| Weight of LCD screen | 34g |
| Temperature range | -30°C to +105°C |