At PowerBox-Systems we have developed a new High-End product designed to provide supreme functionality and security for the demanding pilot.
Features
- PowerBus: 2 outputs, 16+2 channels, compatible with other servo bus systems
- Servo-Match function: servo centre, end-points and reverse for all 24 servo outputs
- Door sequencer: six freely programmable outputs with set-up assistant
- SRS: Serial Receiver System provides the facility to use receivers with serial interface: P²BUS, S-Bus, M-Link, EX-Tele, DSM2/DSMX, X-BUS and HoTT
- Unrestricted channel assignment for all 24 PowerBox outputs
- Graphic LCD screen with 128x64 pixels
- Extremely user-friendly menu-based programming using the SensorSwitch
- Up to 18 channels - depending on the radio control system in use
- Signal amplification and interference suppression for all 24 outputs
- Flight recorder, recording of lost frames, fail-safe events and all battery data
- Variable frame rate, range 9ms - 21ms
- Two 16-bit processors for fast, high-resolution signal processing
- 2 x double-regulated output voltages for receivers and servos
- 2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V
- Connection facilities for P²BUS, S-Bus, M-Link, EX-Tele, DSM2/DSMX, X-BUS and HoTT downlink bus systems
- Direct transmission of battery voltage, capacity, RX-data and GPS data to the transmitter
- Separate voltage and capacity display for each battery
- Minimum value memory alerts the user to voltage collapses
- Large-area heat-sinks for high regulator performance
- Regulator monitoring, regulator error indicator
- Support for four battery types: LiPo/LiIon, NiMH / NiCd, LiFePo
- Suppression of any servo feedback currents which may occur
- Updateable with PowerBox Systems USB Interface connectors
Set contents
- PowerBox Champion SRS
- LCD screenSensorSwitch
- 2 three-core patch-leads, 180 mm
- 4 retaining screws
- 4 rubber grommets / brass spacer sleeves, fitted
- Operating instructions in German and English
Operation instructions;
untitled (powerbox-systems.com)
Technical Data
| Operating voltage | 4.0V - 9.0V |
| Power supply | 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH |
| Current drain Power-on state | 185mA (with LCD) |
| Current drain Standby | 30µA |
| Maximum load current | Peak 4x20A |
| Drop-out voltage | 0.3V |
| Output voltage | 5.9V and/or 7.4V regulated |
| Signal input | serial |
| Supported RC systems | PowerBox, Futaba, MPX, Jeti, Spektrum, JR, Graupne |
| Receiver redundancy | SRS |
| Channels | 18 |
| Servo sockets | 24 |
| Programmable servo outputs | 24 |
| Servo signal resolution | 0.5µs |
| Signal frame rate | 9ms, 12ms, 15ms, 18ms, 21ms |
| Screen | LCD, backlite |
| Integral door sequencer | yes |
| Supported telemetry systems | P²BUS, S-Bus, M-Link, EX-Tele, DSMX, X-BUS, HoTT |
| Dimensions | 136 x 82 x 20 mm |
| Weight | 158g |
| Weight Sensor Switch | 15g |
| Weight of LCD screen | 65g |
| Temperature range | -30°C to +75°C |