Important notice to our customers; We will be closing for our Christmas/New Year break from 21/12/2024 and reopening on 22/01/2025. Therefore any orders placed during this time will not be processed until our return. We would like to thank you all for your support over the last 12 months and wish you all a very Merry Christmas and a Safe New Year

SCORPION BRUSHLESS MOTOR HK2206-3900KV

SCORPION BRUSHLESS MOTOR HK2206-3900KV

HK-2206-3900KV
Regular price
$59.00
Sale price
$59.00
Regular price
Arriving Soon
Unit price
per 
Shipping calculated at checkout.

Scorpion HK2206-3900Kv Brushless Motor
[MASHK22063900]
$59.00


Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are N-50EH style, which are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

All Scorpion HK Series 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. This motor is specifically designed for the newer micro helicopters, such as the T250, that requires 2.5mm output shaft.

Scorpion Motors are built to last, however, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

Specifications

Stator Diameter 22.0 mm (0.87 in)
Stator Thickness 6 mm (0.24 in)
No. of Stator Arms 9
No. of Magnet Poles 6
Motor Wind 24 Turn Delta
Motor Wire 7-Strand 0.19mm
Motor Kv 3900 RPM / Volt
No-Load Current (Io) 0.83 Amps @ 6 volts
Motor Resistance (Rm) 0.064 Ohms
Max Continuous Current 14 Amps
Max Continuous Power 150 Watts
Weight 31.6 Grams (1.12 oz)
Outside Diameter 27.9 mm (1.09 in)
Shaft Diameter 2.5 mm (0.10 in)
Body Length 22.6mm (0.09 in)
Overall Shaft Length 32.6 mm (1.28 in)
Max Lipo Cell 3s