PowerBox Champion SRS
PowerBox Champion SRS
PowerBox Champion SRS
PowerBox Champion SRS
PowerBox Champion SRS
  • Load image into Gallery viewer, PowerBox Champion SRS
  • Load image into Gallery viewer, PowerBox Champion SRS
  • Load image into Gallery viewer, PowerBox Champion SRS
  • Load image into Gallery viewer, PowerBox Champion SRS
  • Load image into Gallery viewer, PowerBox Champion SRS

PowerBox Champion SRS

Regular price
$990.00
Sale price
$990.00
Regular price
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

At PowerBox-Systems we have developed a new High-End product designed to provide supreme functionality and security for the demanding pilot.

Features

  • PowerBus: 2 outputs, 16+2 channels, compatible with other servo bus systems
  • Servo-Match function: servo centre, end-points and reverse for all 24 servo outputs
  • Door sequencer: six freely programmable outputs with set-up assistant
  • SRS: Serial Receiver System provides the facility to use receivers with serial interface: P²BUS, S-Bus, M-Link, EX-Tele, DSM2/DSMX, X-BUS and HoTT
  • Unrestricted channel assignment for all 24 PowerBox outputs
  • Graphic LCD screen with 128x64 pixels
  • Extremely user-friendly menu-based programming using the SensorSwitch
  • Up to 18 channels - depending on the radio control system in use
  • Signal amplification and interference suppression for all 24 outputs
  • Flight recorder, recording of lost frames, fail-safe events and all battery data
  • Variable frame rate, range 9ms - 21ms
  • Two 16-bit processors for fast, high-resolution signal processing
  • 2 x double-regulated output voltages for receivers and servos
  • 2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V
  • Connection facilities for P²BUS, S-Bus, M-Link, EX-Tele, DSM2/DSMX, X-BUS and HoTT downlink bus systems
  • Direct transmission of battery voltage, capacity, RX-data and GPS data to the transmitter
  • Separate voltage and capacity display for each battery
  • Minimum value memory alerts the user to voltage collapses
  • Large-area heat-sinks for high regulator performance
  • Regulator monitoring, regulator error indicator
  • Support for four battery types: LiPo/LiIon, NiMH / NiCd, LiFePo
  • Suppression of any servo feedback currents which may occur
  • Updateable with PowerBox Systems USB Interface connectors

Set contents

  • PowerBox Champion SRS
  • LCD screenSensorSwitch
  • 2 three-core patch-leads, 180 mm
  • 4 retaining screws
  • 4 rubber grommets / brass spacer sleeves, fitted
  • Operating instructions in German and English

Technical Data

Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 185mA (with LCD)
Current drain Standby 30µA
Maximum load current Peak 4x20A
Drop-out voltage 0.3V
Output voltage 5.9V and/or 7.4V regulated
Signal input serial
Supported RC systems PowerBox, Futaba, MPX, Jeti, Spektrum, JR, Graupne
Receiver redundancy SRS
Channels 18
Servo sockets 24
Programmable servo outputs 24
Servo signal resolution 0.5µs
Signal frame rate 9ms, 12ms, 15ms, 18ms, 21ms
Screen LCD, backlite
Integral door sequencer yes
Supported telemetry systems P²BUS, S-Bus, M-Link, EX-Tele, DSMX, X-BUS, HoTT
Dimensions 136 x 82 x 20 mm
Weight 158g
Weight Sensor Switch 15g
Weight of LCD screen 65g
Temperature range -30°C to +75°C