Important notice to our customers; We will be closing for our Christmas/New Year break from 21/12/2024 and reopening on 22/01/2025. Therefore any orders placed during this time will not be processed until our return. We would like to thank you all for your support over the last 12 months and wish you all a very Merry Christmas and a Safe New Year

PowerBox Mercury SR2
PowerBox Mercury SR2
PowerBox Mercury SR2
PowerBox Mercury SR2
PowerBox Mercury SR2
PowerBox Mercury SR2
PowerBox Mercury SR2
PowerBox Mercury SR2
PowerBox Mercury SR2
  • Load image into Gallery viewer, PowerBox Mercury SR2
  • Load image into Gallery viewer, PowerBox Mercury SR2
  • Load image into Gallery viewer, PowerBox Mercury SR2
  • Load image into Gallery viewer, PowerBox Mercury SR2
  • Load image into Gallery viewer, PowerBox Mercury SR2
  • Load image into Gallery viewer, PowerBox Mercury SR2
  • Load image into Gallery viewer, PowerBox Mercury SR2
  • Load image into Gallery viewer, PowerBox Mercury SR2
  • Load image into Gallery viewer, PowerBox Mercury SR2

PowerBox Mercury SR2

4130
Regular price
$732.00
Sale price
$732.00
Regular price
Arriving Soon
Unit price
per 
Shipping calculated at checkout.

All the features which are usually the preserve of the larger power supply units are present in the compact PowerBox Mercury SR2: iGyro, servo matching, unrestricted channel assignment and even a door sequencer: it really is a complete system!+

Features

  • 16 outputs
  • High-performance battery backer with high continuous load capacity
  • OLED screen, legible in sunlight
  • Bi-lingual menu system
  • Consistent duplication of all power electronics
  • Redundant electronic switch
  • Servo matching for all 16 outputs
  • Auto matching function
  • Door sequencer with Setup Assistant
  • The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
  • 9 independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder
  • Two selectable output voltages: 6.0 V or 7.8 V
  • Optional GPS III for speed-dependent gyro compensation
  • Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link, JR X-BUS and Graupner HoTT
  • Transmission of battery, receiver and GPS* data
  • Virtually all features can be controlled from PowerBox and Jeti transmitters
  • Selectable servo frame rate: 12ms, 14ms, 16ms, 18ms
  • Servo feedback current suppression

Set contents

  • PowerBox Mercury SR2
  • OLED Display
  • SensorSwitch
  • 2 patch-leads
  • 4 rubber grommets and brass spacer sleeves
  • 8 retaining screws
  • Operating instructions in German and English


Technical Data

Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 100mA
Current drain Standby 30µA
Maximum load current 2 x 20A (<30s)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.8V
Signal input serial
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo sockets 16
Programmable servo outputs 16
Servo signal resolution 0,25µs
Signal frame rate 12ms, 14ms, 16ms, 18ms
Gyro sensor type external iGyro SAT
Number of sensor axes 9
Screen OLED 128x64 pixels
Integral door sequencer yes
Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott, X.BUS
Dimensions 89 x 54 x 19 mm
Weight 75g
Weight Sensor Switch 15g
Weight of LCD screen 34g
Temperature range -30°C to +105°C


Operating instructions

Test Report, Jet International